mdi 37mm, PTFE, 0.2µm Inline Vent Filter
mdi 37mm disposable PTFE inline filters are compact devices to suit a multituede of applications in life sciences research, biopharmaceuticals and healthcare.
| Specification | ||
| Pore Size | 0.2µm | |
| Filtration Area | 9,6cm² | |
Dimensions |
Diameter | 45mm |
| Length | 64mm | |
| End Connections | Inlet | 1/4" - 3/8" stepped hose |
| Outlet | 1/4" - 3/8" stepped hose | |
| Retention Efficiency | LRV>7 for Br. Diminuta | |
| Maximum Operating Pressure | 5Kg/cm² @30°C | |
| Typical AirFlow Rate | 18 lpm (at delta P = 0.7Kg/cm²) | |
| Bubble Point | >= 19psi (IPA wet) | |
| Biosafety | Passes the biological test for Class VI plastics as described in USP | |
| Sterilization | Autoclavable at 121°C for 30 minutes upto 30 cycles | |
| Extractable (with IPA) | Within limits specified in USP | |
| Oxidizable Matter | Passes test as per USP | |
| Special Feautures | |
 |
Large effective filtration area |
|
High flow rates |
|
Very wide chemical compatibility |
|
Multiple autoclavable |
|
Heat sealed |
|
Light weight and self supporting |
|
100% Integrity tested |
Sterile air/gas filtration Hydrophobic safety barrier against body fluids Venting of small bioreactors and culture vessels Solvent disinfectant filtration | Construction | |
| Hosing | Polypropylene housing |
| Filter Media | PTFE membrane, 0.2µm |
| Packaging and identification | |
| Each Vent Filter is identified with a Lot No. embossed on it |
|
| The Vent filter is individually packed in polyethylene pack, with a label |
|
| 12 units are packed in one box. The box is labeled outside |
|
 |
 |